更新

RookieStation/CmdLogoExtrusion.cs

@@ -30,7 +30,7 @@ namespace RookieStation
                 GeometryInstance geometryInstance = geomObj as GeometryInstance;
                 if (geometryInstance != null)
                 {
-                    foreach (var instObj in geometryInstance.GetInstanceGeometry())
+                    foreach (var instObj in geometryInstance.GetSymbolGeometry())
                     {
                         Curve curve = instObj as Curve;
                         if (curve == null)
@@ -41,71 +41,103 @@ namespace RookieStation
                     }
                 }
             }
+            //doc.Invoke(ts =>
+            //{
+            //    foreach (var curve in curves)
+            //    {
+            //        SketchPlane plane = SketchPlane.Create(doc, Plane.CreateByNormalAndOrigin(XYZ.BasisZ, XYZ.Zero));
+            //        doc.FamilyCreate.NewModelCurve(curve, plane);
+            //    }
+            //});
             CurveArrArray arrArray = new CurveArrArray();
             CurveArray array = new CurveArray();
-            do
-            {
-                Curve curve = curves.Last();
-                array.Clear();
-                Curve tempcurve = curve;
-                var endxyz = tempcurve.GetEndPoint(1);
-                for (int j = curves.Count - 1; j >= 0; j--)
-                {
-                    Curve cur = curves[j];
-                    if (cur.Equals(tempcurve))
-                    {
-                        array.Append(cur);
-                        curves.Remove(cur);
-                        continue;
-                    }
-                    if (cur.GetEndPoint(0).IsAlmostEqualTo(endxyz))
-                    {
-                        tempcurve = cur;
-                        endxyz = cur.GetEndPoint(1);
-                        array.Append(cur);
-                        curves.Remove(cur);
-                        continue;
-                    }
-                    if (cur.GetEndPoint(1).IsAlmostEqualTo(endxyz))
-                    {
-                        tempcurve = cur;
-                        endxyz = cur.GetEndPoint(0);
-                        array.Append(cur);
-                        curves.Remove(cur);
-                        continue;
-                    }
-                }
-                arrArray.Append(array);
-            } while (curves.Count > 0);
 
-            using (Transaction trans = new Transaction(doc, "cmd"))
+            SearchCurveConnected(curves, curves.FirstOrDefault(), array, arrArray);
-            {
+            //do
-                try
-                {
-                    trans.Start();
-                    //foreach (var item in curves)
             //{
-                    //}
+            //    Curve baseCurve = curves.Last();
-                    //doc.FamilyCreate.NewModelCurve()
+            //    var tempEndXyz = baseCurve.GetEndPoint(1);
+            //    array.Clear();
+            //    array.Append(baseCurve);
+            //    curves.Remove(baseCurve);
+
+            //    for (int j = curves.Count - 1; j >= 0; j--)
+            //    {
+            //        Curve tempCurve = curves[j];
+
+            //        if (tempCurve.GetEndPoint(0).IsAlmostEqualTo(tempEndXyz))
+            //        {
+            //            baseCurve = tempCurve;
+            //            tempEndXyz = tempCurve.GetEndPoint(1);
+            //            array.Append(tempCurve);
+            //            curves.Remove(tempCurve);
+            //            continue;
+            //        }
+            //        else if (tempCurve.GetEndPoint(1).IsAlmostEqualTo(tempEndXyz))
+            //        {
+            //            baseCurve = tempCurve;
+            //            tempEndXyz = tempCurve.GetEndPoint(0);
+            //            array.Append(tempCurve);
+            //            curves.Remove(tempCurve);
+            //            continue;
+            //        }
+            //    }
+            //    arrArray.Append(array);
+            //} while (curves.Count > 0);
+
+            doc.Invoke(ts =>
+            {
                 SketchPlane plane = SketchPlane.Create(doc, Plane.CreateByNormalAndOrigin(XYZ.BasisZ, XYZ.Zero));
+
                 foreach (CurveArray arr in arrArray)
                 {
-                        doc.FamilyCreate.NewModelCurveArray(arr, plane);
+                    var ml = doc.FamilyCreate.NewModelCurveArray(arr, plane);
+                }
+                //foreach (CurveArray arr in arrArray)
+                //{
+                //    doc.FamilyCreate.NewExtrusion(true, arrArray, plane, 5.0 / 304.8);
+
+                //    //var ml = doc.FamilyCreate.NewModelCurveArray(arr, plane);
+                //}
+            });
+            return Result.Succeeded;
         }
 
-                    trans.Commit();
+        /// <summary>
-                }
+        /// 找到所有连接在一起的线圈并分好组
-                catch (Exception ex)
+        /// </summary>
+        /// <param name="curves">所有线</param>
+        /// <param name="initcurve">用于查找与其连接的初始线</param>
+        /// <param name="initCurveArray">初始的线串</param>
+        /// <param name="curveArrArray">所有线串的集合</param>
+        private void SearchCurveConnected(List<Curve> curves, Curve initcurve, CurveArray initCurveArray, CurveArrArray curveArrArray)
         {
-                    Log.WriteLog(ex.Message);
+            for (int i = 0; i < curves.Count; i++)
-                    if (trans.GetStatus() == TransactionStatus.Started)
             {
-                        trans.RollBack();
+                Curve tempCurve = curves[i];
+                var baseEndXyz = initcurve.GetEndPoint(0);
+                if (tempCurve.GetEndPoint(0).IsAlmostEqualTo(baseEndXyz) || tempCurve.GetEndPoint(1).IsAlmostEqualTo(baseEndXyz))
+                {
+                    initCurveArray.Append(tempCurve);
+                    curves.Remove(tempCurve);
+                    SearchCurveConnected(curves, tempCurve, initCurveArray, curveArrArray);
+
+                    return;
                 }
-                    return Result.Cancelled;
+                else if (i == curves.Count() - 1)
+                {
+                    curveArrArray.Append(initCurveArray);
+                    //array.Clear();
+                    initCurveArray = new CurveArray();
+                    SearchCurveConnected(curves, curves.FirstOrDefault(), initCurveArray, curveArrArray);
+                    ////由于最后一轮运行完递归后，所有线段均成串，只执行上面的if内容，所以没办法将剩余线加到集合中。
+                    if (curves.Count() == 0)
+                    {
+                        curveArrArray.Append(initCurveArray);
+                    }
+                    return;
                 }
             }
-            return Result.Succeeded;
         }
     }
 }

RookieStation/Properties/AssemblyInfo.cs

@@ -8,7 +8,7 @@ using System.Runtime.InteropServices;
 [assembly: AssemblyTitle("RookieStation")]
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
+[assembly: AssemblyCompany("永特新工程")]
 [assembly: AssemblyProduct("RookieStation")]
 [assembly: AssemblyCopyright("Copyright ©  2021")]
 [assembly: AssemblyTrademark("")]

RookieStation/RookieStation.csproj

@@ -33,6 +33,9 @@
     <WarningLevel>4</WarningLevel>
     <PlatformTarget>x64</PlatformTarget>
   </PropertyGroup>
+  <PropertyGroup>
+    <ApplicationIcon>Resources\YTX.ico</ApplicationIcon>
+  </PropertyGroup>
   <ItemGroup>
     <Reference Include="AdWindows, Version=2018.11.1.0, Culture=neutral, processorArchitecture=MSIL">
       <HintPath>..\packages\Revit_API_x64.2020.0.0\lib\NET470\AdWindows.dll</HintPath>
@@ -327,6 +330,7 @@
   </ItemGroup>
   <ItemGroup>
     <Content Include="Resources\WallFinishes.png" />
+    <Content Include="Resources\YTX.ico" />
     <None Include="Resources\WorkSchedule.png" />
     <Content Include="RsLibrary\Texture\免费WiFi.png">
       <CopyToOutputDirectory>Always</CopyToOutputDirectory>

RookieStationSetup/RookieStationSetup.vdproj

@@ -2239,15 +2239,15 @@
         {
         "Name" = "8:Microsoft Visual Studio"
         "ProductName" = "8:菜鸟驿站工具集"
-        "ProductCode" = "8:{AFF84E16-0B2D-4AA9-8FB6-270E31E03704}"
+        "ProductCode" = "8:{3C7C28E4-ABFB-47B5-A2D2-1D3BE24156C2}"
-        "PackageCode" = "8:{BBFE184F-070A-4A8E-9C9D-FF185BB2F5F2}"
+        "PackageCode" = "8:{EC98D320-1D7C-47B2-B3C8-9F02E7AE396A}"
         "UpgradeCode" = "8:{127EC3EC-7539-468B-84EA-E1ECDD6204E6}"
         "AspNetVersion" = "8:2.0.50727.0"
         "RestartWWWService" = "11:FALSE"
         "RemovePreviousVersions" = "11:TRUE"
         "DetectNewerInstalledVersion" = "11:TRUE"
         "InstallAllUsers" = "11:TRUE"
-        "ProductVersion" = "8:1.0.1"
+        "ProductVersion" = "8:1.0.2"
         "Manufacturer" = "8:YTX Engineering"
         "ARPHELPTELEPHONE" = "8:"
         "ARPHELPLINK" = "8:"
@@ -2255,8 +2255,8 @@
         "Subject" = "8:"
         "ARPCONTACT" = "8:YTX Engineering"
         "Keywords" = "8:"
-        "ARPCOMMENTS" = "8:"
+        "ARPCOMMENTS" = "8:永特新工程"
-        "ARPURLINFOABOUT" = "8:"
+        "ARPURLINFOABOUT" = "8:https://www.yongtexin.com/"
         "ARPPRODUCTICON" = "8:"
         "ARPIconIndex" = "3:0"
         "SearchPath" = "8:"
@@ -2704,7 +2704,7 @@
         {
             "{5259A561-127C-4D43-A0A1-72F10C7B3BF8}:_FBE461B9D4BD4603919E2821D88FB7CB"
             {
-            "SourcePath" = "8:..\\RookieStation\\obj\\Release\\RookieStation.dll"
+            "SourcePath" = "8:..\\RookieStation\\obj\\Debug\\RookieStation.dll"
             "TargetName" = "8:"
             "Tag" = "8:"
             "Folder" = "8:_7C1EF99E309C4A3FB02B902F06BE7F60"