using System.Windows;
using Nice3point.Revit.Toolkit.External;
using Nice3point.Revit.Toolkit.External.Handlers;
using ShrlAlgoToolkit.RevitAddins.FamMaster;
using ShrlAlgoToolkit.RevitAddins.ModelManager;
using ShrlAlgoToolkit.RevitAddins.Properties;
using ShrlAlgoToolkit.RevitAddins.RvCivil;

namespace ShrlAlgoToolkit.RevitAddins.Entry;

//[Obfuscation(Exclude = true, ApplyToMembers = true)]
public class RvApp : ExternalApplication
{
    private static readonly string TabName = Settings.Default.TabName;
    private AsyncEventHandler saveHandler;
    readonly System.Timers.Timer saveTimer = Variables.AutoSaveTimer;
    private void OnTimedEvent(object source, System.Timers.ElapsedEventArgs e)
    {
        saveHandler.RaiseAsync(app =>
            {
                var doc = app.ActiveUIDocument.Document;
#if REVIT2018

                if (doc.IsModified && !string.IsNullOrEmpty(doc.PathName) && !doc.IsReadOnlyFile)
#else
                if (!doc.IsBackgroundCalculationInProgress() && doc.IsModified && !string.IsNullOrEmpty(doc.PathName)&&!doc.IsReadOnlyFile)
#endif
                {
                    try
                    {
                        doc.Save();
                    }
                    catch (Autodesk.Revit.Exceptions.OperationCanceledException)
                    {
                        MessageBox.Show("已手动取消本次保存", "提示");
                    }
                    catch (Exception)
                    {
                        var command = RevitCommandId.LookupPostableCommandId(PostableCommand.Save);
                        app.PostCommand(command);
                        //MessageBox.Show("本次自动保存失败，将重新计时", "提示");
                    }
                }
            });
    }
    public override void OnStartup()
    {
        saveHandler = new();
        UiApplication.CreateRibbonTab(Settings.Default.TabName);

        var versionNumber = UiApplication.Application.VersionNumber;
        var subVersionNumber = UiApplication.Application.SubVersionNumber;
        var subVersion = new Version(subVersionNumber);
        var minVersion = new Version("2018.1");
        if (versionNumber == "2018" && subVersion < minVersion)
        {
            MessageBox.Show("版本小于2018.1,部分功能可能无法使用，请使用升级补丁升级Revit软件", "提示");
        }

        var ribbon = Autodesk.Windows.ComponentManager.Ribbon;

        var rt = ribbon.Tabs.FirstOrDefault(tab => tab.Name == Settings.Default.TabName);
        ribbon.Tabs.Remove(rt);
        //foreach (var tab in ribbon.Tabs)
        //{
        //    if (tab.Name == Settings.Default.TabName)
        //    {
        //        rt = tab;
        //        ribbon.Tabs.Remove(tab);
        //        break;
        //    }
        //}
        ribbon.Tabs.Insert(0, rt);

        CivilApp(Application);
        MEPApp(Application);
        _ = new ModifyTabApp(UiApplication);
        _ = new DrawingViewApp(Application);
        CreateCommonTools(Application);
        _ = new TabManagerApp(Application);
        _ = new FamilyApp(Application, UiApplication);

        if (Settings.Default.IsActiveAutoSave)
        {
            var interval = Settings.Default.AutoSaveIntervalTime * 60_000;
            saveTimer.Interval = interval;
            saveTimer.Elapsed -= OnTimedEvent;
            saveTimer.Elapsed += OnTimedEvent;
            saveTimer.Start();
        }
    }


    // private static NavigateUri FontUri => new NavigateUri(
    //"pack://application:,,,/ShrlAlgoToolkit.RevitAddins;component/");
    // private static FontFamily FontFamily => new FontFamily(FontUri, "./Fonts/#BoxIcons");

    public static void CivilApp(UIControlledApplication application)
    {
        var ribbonPanel = application.CreateRibbonPanel(TabName, "土建装饰");

        var floorFinishesPbd = UIAssist.NewPushButtonData<FloorFinishesCmd>(
            "房间饰面",
            Resources.tites_32px,
            Resources.tites_16px,
            "创建房间饰面"
        );

        var curtainFinishesPbd = UIAssist.NewPushButtonData<BricksFinishesCmd>(
            "铺贴饰面",
            Resources.finishes_32px,
            Resources.finishes_16px
        );
        var wallFinishesPbd = UIAssist.NewPushButtonData<WallFinishesCmd>(
            text: "墙饰面",
            Resources.bricks_32px,
            Resources.bricks_16px
        );

        var slopeFloorPbd = UIAssist.NewPushButtonData<SlopedFloorCmd>(
            "坡度楼板",
            Resources.slope_floor_32px,
            Resources.slope_floor_16px,
            "分别选择两个楼板的两条平行线创建坡度楼板"
        );

        var createOpeningsPbd = UIAssist.NewPushButtonData<CreateOpeningsCmd>(
            "创建洞口",
            Resources.openings_32px,
            Resources.openings_16px,
            "根据管线创建洞口"
        ).SetAvailability<EnableInView3D>();
        var modelSplitPbd = UIAssist.NewPushButtonData<ModelSplitterCmd>(
            "模型拆分",
            Resources.separation_32px,
            Resources.separation_16px,
            "按标高拆分为单独的文件"
        );
        var splitComPbd = UIAssist.NewPushButtonData<SplitComsByLevelCmd>(
            "分割墙柱",
            Resources.model_split_32px,
            Resources.model_split_16px,
            "按标高拆分墙、柱"
        );
        var connectPbd = UIAssist.NewPushButtonData<CivilConnectionCmd>(
            "土建连接",
            Resources.connect_32px,
            Resources.connect_16px,
            "土建构件连接处理"
        );
        ribbonPanel.AddStackedItems(slopeFloorPbd, connectPbd, createOpeningsPbd);
        ribbonPanel.AddStackedItems(splitComPbd, modelSplitPbd);
        ribbonPanel.AddStackedItems(wallFinishesPbd, floorFinishesPbd, curtainFinishesPbd);
    }

    private static void MEPApp(UIControlledApplication application)
    {
        var panel = application.CreateRibbonPanel(TabName, "机电");
        var standMepCurve = UIAssist.NewButtonData<Mep.StandMepCurveCmd, EnableInViewPlan>(
            "创建立管",
            null,
            Resources.stand_mepcurve_16px
        ).SetAvailability<EnableInViewPlan>();
        var bloomConnector = UIAssist.NewPushButtonData<Mep.BloomConnectorCmd>("引出管线", null, Resources.bloom_16px, "从连接件生成管线");
        var anyConnect = UIAssist.NewPushButtonData<Mep.AnyConnectCmd>("任意连接", null, Resources.any_connect_16px, "选择任意管线进行连接");
        var moveConnect = UIAssist.NewPushButtonData<Mep.MoveConnectCmd>(
            "移动连接",
            null,
            Resources.move_connect_16px,
            "根据最近距离的未连接的连接件，将其连接或角度过大则对齐连接"
        );
        var breakMepCurveBtn = UIAssist.NewPushButtonData<Mep.BreakMEPCurveCmd>(
            "打断管线",
            null,
            Resources.break_mepcurve_16px,
            "将管线打断成两根管线并保留打断后的连接关系"
        );
        var disConnect = UIAssist.NewPushButtonData<Mep.DisconnectCmd>(
            "取消连接",
            null,
            Resources.disconnect_16px,
            "取消设备、管线之间的连接"
        );
        var correctSlope = UIAssist.NewPushButtonData<Mep.CorrectMEPCurveSlopeCmd>(
            "坡度修正",
            null,
            Resources.correct_mep_16px,
            "修正管线的坡度"
        );

        var moveMEP = UIAssist.NewPushButtonData<Mep.MoveMEPCmd>(
            "移动管线",
            Resources.move_MEP_32px,
            Resources.move_MEP_16px,
            "基于管线底部参照或距离，上下移动管线"
        );
        var clashReport = UIAssist.NewPushButtonData<Mep.ClashReportCmd>(
            "碰撞报告",
            Resources.clash_report_32px,
            Resources.clash_report_16px,
            "根据Revit生成的报告，快速定位碰撞构件"
        );
        var terminalConnect = UIAssist.NewPushButtonData<Mep.TerminalConnectToDuctCmd>(
            "连接风口",
            Resources.air_terminal_32px,
            Resources.air_terminal_16px
        );
        var clashResolve = UIAssist.NewPushButtonData<Mep.ClashResolveCmd>(
            "碰撞处理",
            Resources.clash_resolve_32px,
            Resources.clash_resolve_16px
        );
        var headroomCheck = UIAssist.NewPushButtonData<Mep.HeadroomCheckCmd>(
            "净高检查",
            Resources.head_room_32px,
            Resources.head_room_16px
        );
        var flipWorkplane = UIAssist.NewPushButtonData<Mep.FlipWorkplaneCmd>(
            "翻转工作平面",
            Resources.flip_workplane_32px,
            Resources.flip_workplane_16px,
            "将可以翻转工作平面的族实例，翻转其工作平面"
        );
        var rotateInstance = UIAssist.NewPushButtonData<Mep.RotateInstanceCmd>(
            "旋转管件实例",
            Resources.rotate_instance_32px,
            Resources.rotate_instance_16px,
            "将管件族实例根据已连接的情况进行旋转"
        );
        var addInsulation = UIAssist.NewPushButtonData<Mep.AddInsulationCmd>(
          "保温层",
          Resources.add_insulation_32px,
          Resources.add_insulation_16px,
          "对水管和风管添加保温层"
        );
        var arrangeMEPCurve = UIAssist.NewPushButtonData<Mep.ArrangeMEPCurveCmd>(
            "整理管线",
            Resources.arrange_mep_32px,
            Resources.arrange_mep_16px,
            "根据相对位置排布管线"
        );

        panel.AddStackedItems(standMepCurve, anyConnect, moveConnect);
        panel.AddStackedItems(correctSlope, moveMEP, bloomConnector);
        panel.AddStackedItems(breakMepCurveBtn, disConnect, terminalConnect);
        panel.AddStackedItems(flipWorkplane, rotateInstance);
        panel.AddStackedItems(addInsulation, arrangeMEPCurve);
        panel.AddStackedItems(clashResolve, clashReport, headroomCheck);
    }

    private static void CreateCommonTools(UIControlledApplication application)
    {
        var ribbonPanel = application.CreateRibbonPanel(TabName, "通用工具");
        //PushButtonData setAllViewDisplayPbd =
        //    new PushButtonData("视图显示", "视图显示", AddInPath, typeof(SetAllViewDisplayCmd).FullName)
        //    {
        //        ImageUtil.ConvertToBitmapSource(Resources.cmd_16px),
        //        ImageUtil.ConvertToBitmapSource(Resources.cmd_16px),
        //        "以当前视图的设置，应用到其他视图显示样式"
        //    };

        //PushButtonData dataStoragePbd =
        //    new PushButtonData("扩展数据", "扩展数据", AddInPath, typeof(DataStorageCmd).FullName)
        //    {
        //        ImageUtil.ConvertToBitmapSource(Resources.entity_32px),
        //        ImageUtil.ConvertToBitmapSource(Resources.entity_32px),
        //        "存储内容到扩展数据"
        //    };
        var modelCheckPbd = UIAssist.NewPushButtonData<ModelCheckCmd>(
            "模型检查",
            Resources.model_check_16px,
            Resources.model_check_32px,
            "对模型进行多项要求的检查"
        );
        var templateManager = UIAssist.NewPushButtonData<Standardizer.TemplateManagerCmd>(
           "样板定制",
           Resources.template_32px,
           Resources.template_16px,
           "对项目样板进行批量处理"
       );
        var autoSavePbd = UIAssist.NewPushButtonData<General.AutoSaveCmd>("定时保存", Resources.save_32px, Resources.save_16px);
        var purgeBtn = UIAssist.NewPushButtonData<General.PureModelCmd>(
            "清理模型",
            Resources.purge_32px,
            Resources.purge_16px,
            "清理并压缩模型文件大小"
        );
        var pipesCreatorPbd = UIAssist.NewPushButtonData<Modeling.PipesCreatorCmd>(
            "管线生成",
            Resources.pipe_creator_32px,
            Resources.pipe_creator_16px,
            "根据dwg图纸生成管线"
        );
        var instanceCreatorPbd = UIAssist.NewPushButtonData<Modeling.InstanceCreatorCmd>(
            "实例布置",
            Resources.instance_creator_32px,
            Resources.instance_creator_16px,
            "根据dwg块进行族实例布置"
        );
        var modelByCurveCreatorPbd = UIAssist.NewPushButtonData<ModelByCurveCreatorCmd>(
            "曲线布置",
            Resources.model_by_curve_32px,
            Resources.model_by_curve_16px,
            "根据dwg曲线或模型线对轮廓族放样或者布置族实例"
        );
        var toggleBackgroundPbd = UIAssist.NewPushButtonData<DrawSheet.SwitchBackgroundCmd>(
            "切换背景",
            Resources.background_32px,
            Resources.background_16px,
            "切换视口背景颜色"
        );

        ribbonPanel.AddItem(modelCheckPbd);
        ribbonPanel.AddItem(templateManager);
        ribbonPanel.AddStackedItems(instanceCreatorPbd, modelByCurveCreatorPbd, pipesCreatorPbd);
        ribbonPanel.AddStackedItems(toggleBackgroundPbd, purgeBtn, autoSavePbd);

        //ribbonPanel.AddAwItem(toggleBackgroundPbd);
        //ribbonPanel.AddAwItem(autoSavePbd);

        //RadioButtonGroupData groupData = new RadioButtonGroupData("定位");
        //RadioButtonGroup radioBtnGroup = ribbonPanel.AddAwItem(groupData) as RadioButtonGroup;
        //radioBtnGroup.AddAwItem(updateViewBySelectElemPbd);
        //var tg2 = radioBtnGroup.AddAwItem(updateViewBySelectElemPbd);
        //tg2.Visible = false;
        //var group = ribbonPanel.AddRadioButtonGroup(groupData, updateViewBySelectElemPbd, updateViewBySelectElemPbd1);
    }

}