ShrlAlgoToolkit/ShrlAlgoToolkit.Revit/Extensions/FamilyExtensions.cs

using Autodesk.Revit.DB;

namespace ShrlAlgoToolkit.Revit.Extensions
{
    public static class FamilyExtensions
    {
        public static void Rename(this FamilySymbol symbol, string newString)
        {
            var n = 0;
            bool isExistName;
            while (true)
            {
                try
                {
                    symbol.Name = newString;
                }
                catch (Autodesk.Revit.Exceptions.ArgumentException)
                {
                    isExistName = true;
                    n += 1;
                    break;
                }
            }
            if (isExistName)
            {
                symbol.Name = $"{newString} {n}";
            }
        }
        /// <summary>
        ///     朝着向量方向左侧偏移并调整角度对齐直线
        /// </summary>
        /// <param name="fi"></param>
        /// <param name="referLine"></param>
        /// <param name="offset"></param>
        public static void AdjustByLine(this FamilyInstance fi, Line referLine, double offset)
        {
            var doc = fi.Document;
            //朝着向量方向左侧偏移
            var zdir = XYZ.BasisZ;

            //通过第三点垂直于直线的单位向量（无论左右侧）*偏移距离（一半的闸机长度）
            var offsetVector = zdir.CrossProduct(referLine.Direction).Normalize() * offset;
            //旋转角度
            var radian = XYZ.BasisY.AngleTo(offsetVector);
            //判断相对于Y轴是正向角度（逆时针）还是逆向角度（顺时针）
            var z = offsetVector.CrossProduct(XYZ.BasisY).Normalize();
            if (z.IsAlmostEqualTo(XYZ.BasisZ))
            {
                //逆向旋转，角度取负值
                radian = -radian;
            }

            var p = fi.GetLocXYZ();
            var l = Line.CreateUnbound(p, XYZ.BasisZ);
            //旋转，移动
            ElementTransformUtils.RotateElement(doc, fi.Id, l, radian + Math.PI);
            ElementTransformUtils.MoveElement(doc, fi.Id, offsetVector);
        }
        /// <summary>
        ///     调整族实例位置
        /// </summary>
        /// <param name="instances">需要偏移的族实例</param>
        /// <param name="referLine">用于调整偏移和角度的参考线</param>
        /// <param name="offset">偏移量</param>
        public static void AdjustByLine(this List<FamilyInstance> instances, Line referLine, double offset = 0.0)
        {
            var doc = instances.FirstOrDefault().Document;
            var zdir = XYZ.BasisZ;

            //通过第三点垂直于直线的单位向量（无论左右侧）*偏移距离（一半的闸机长度）
            var offsetVector = zdir.CrossProduct(referLine.Direction).Normalize();

            //旋转角度
            var angle = XYZ.BasisY.AngleTo(offsetVector);
            //判断相对于Y轴是正向角度（逆时针）还是逆向角度（顺时针）
            var z = offsetVector.CrossProduct(XYZ.BasisY).Normalize();
            if (z.IsAlmostEqualTo(XYZ.BasisZ))
            {
                //逆向旋转，角度取负值
                angle = -angle;
                //var ml = doc.Create.NewModelCurve(Line.CreateBound(XYZ.Zero, re), SketchPlane.Create(doc, Plane.CreateByNormalAndOrigin(XYZ.BasisZ, new XYZ())));
            }

            offsetVector *= offset;
            foreach (var instance in instances)
            {
                var p = instance.GetLocXYZ();
                var l = Line.CreateUnbound(p, XYZ.BasisZ);
                //旋转，移动
                ElementTransformUtils.RotateElement(doc, instance.Id, l, angle);
                ElementTransformUtils.MoveElement(doc, instance.Id, offsetVector);
            }
        }
        /// <summary>
        /// 族参数关联
        /// </summary>
        /// <param name="form">几何体</param>
        /// <param name="formBuiltInParameter">几何体内建参数</param>
        /// <param name="familyParameter">用户创建的族参数</param>
        public static void AssociateParameter(this GenericForm form, BuiltInParameter formBuiltInParameter, BuiltInParameter familyParameter)
        {
            var famdoc = form.Document;
            var p = form.get_Parameter(formBuiltInParameter);
            var fm = famdoc.FamilyManager;
            //var currentType = fm.CurrentType;
            //if (currentType != null & !currentType.HasValue(p))
            //{
            //}
            //var fp = fm.AddParamsToFiles("结构材质", BuiltInParameterGroup.PG_MATERIALS, ParameterType.Material, false);
            var fp = fm.get_Parameter(familyParameter);
            fm.Set(fp, p.AsElementId());
            fm.AssociateElementParameterToFamilyParameter(p, fp);
        }
        /// <summary>
        /// 自适应族放置
        /// </summary>
        /// <param name="familySymbol">自适应的族类型</param>
        /// <param name="points"></param>
        public static FamilyInstance CreateAdaptiveComponent(this FamilySymbol familySymbol, List<XYZ> points)
        {
            var doc = familySymbol.Document;
            //创建实例，并获取其自适应点列表
            var familyInstance = AdaptiveComponentInstanceUtils.CreateAdaptiveComponentInstance(doc, familySymbol);
            var adaptivePoints = AdaptiveComponentInstanceUtils.GetInstancePlacementPointElementRefIds(familyInstance);
            for (var i = 0; i < points.Count; i++)
            {
                if (points.Count != adaptivePoints.Count)
                {
                    continue;
                }

                //Task.Delay(5_00);
                //设置参照点坐标
                if (doc.GetElement(adaptivePoints[i]) is ReferencePoint referencePoint)
                {
                    referencePoint.Position = points[i];
                }
            }
            return familyInstance;
            //PointOnEdge pointOnEdge = commandData.Application.Application.Create.NewPointOnEdge(, locationOnCurve);
            //point.SetPointElementReference(pointOnEdge as PointElementReference);
            //PointLocationOnCurve locationOnCurve = new PointLocationOnCurve(PointOnCurveMeasurementType.NormalizedCurveParameter, 0, PointOnCurveMeasureFrom.Beginning);
        }
    }
}